Related Products
-
HD UTC
UTC CONTROLLER FOR AHD CAMERAS
Accessory Type: Coax Controller
For Use With: AHD camera range -
Power Supply XED 5A and 10A
-
CCTV Camera Power Supply
-
Analog UTC
UTC CONTROLLER FOR CCTV CAMERAS
Accessory Type: Coax Controller
For Use With: CX CCTV camera range -
Monitor 7
AUTO WAYFENG MONITOR
Super-quality image
TFT-display, display your favorite VCD, DVD, DVB ….
Automatic switching on and go to a video source when video signal is detected.
Ideal for car reversing monitor and vehicle entertainment.
Clip on the original rear view mirror simplifies installation and detachment
2CH Vedio in, no one in
Wide viewing angle (V s) 120 x 90
Aspect ratio 4 3
System PAL NTSC auto switch
Black color
Voltage DC + 12V
Power consumption 3W
Working environment -20°C ~ +60°C -
Video Balun
Compatible with all digital HD-TVI, CVI, and AHD analog cameras
No power required
Color video up to 305M for HD-CVI 720P digital camera
Color video up to 200M for HD-CVI 1080P digital camera
Color video up to 200M for HD-TVI 720P & 1080P digital camera
Color video up to 305M for AHD 720 & 960 & 1080p analog camera
Push pin terminal connection for UTP cable
Built-in TVS (transient voltage suppressor) for surge protection
Anti-static wave filter design
Lightning protection design (GRADE III)
60dB crosstalk and noise immunity; exceptional interference rejection -
Hard drive Toshiba 2TB
-
Power Supply DC 12V 5A
-
VGA to BNC Converter
1. Support Composite VIDEO, S-VIDEO, RGB (Optional) output.
2. Power from PS/2 or USB port. Support 640 X 480@60/72/75/85Hz .800 x 600@60/72/75/85Hz,1024 x 768@60/70/75/85Hz , 1280 x 1024@60 display mode.
3. On Screen Display (OSD) operation status, Zoom, Size.
4. Independent Horizontal Size and Vertical Size adjustment, programmable 2D scaling.
5. Pure hardware design, just Plug & Display. No software driver requirement, compatible with any operation system.
6. Switch able NTSC, NTSC-EIAJ (for Japan), PAL, PAL-M, PAL-N, PAL-combination-N and SECAM (via RGB OUT) video system.
7. RGB (OPTION CABLE NEEDED) output supports the interlace format.
8. Supports Position control, ZOOM & MENU button.
9. MENU button supports HSIZE, VSIZE, BRIGHTNESS, CONTRAST, HUE, SATURATION, SHARPNESS and OSD BACKGROUND color adjustment.
10.Simultaneous display on VGA monitor and TV.
11.24 bit, true color digitizer. -
BNC to VGA Converter
It can change the signal of “S” terminator of video into VGA signals line-by-line.
let your monitor change into flicker free display.
This flicker free display is good display.
It also can be connected to VCD / DVD / webcam / set-top box etc.
It will make your monitor be like digital TV.Advanced scan frequency improves the technique,
refresh rate can be easily switched between 60-75Hz, while the pictures
don’t flickResolving capability can be easily
switched among (800×600 / 1024×768 / 1280×1024 / 1440×900 / 1680×1050 / 1920×1080 / 1920×1200),
CRT monitor and LCD monitor are compatibleThe function of
extra strong 3D image denoising makes the pictures clear and steadyDistinguishing
PIP function, and the size and position of the windows can be adjusted
The AV / S terminator input interface can be
connected to VCD / PDP / PS2 / cBroadband PC / TV selector switch (200MHz)